Peng DC fans are widely used in metallurgy, chemical, fertilizer, petrochemical, food, building materials, petroleum, mining, textile, gas station, pneumatic conveying, wastewater treatment and other industrial sectors. Following on from the Shenzhen Yi Rong Chuan electronic technician to introduce DC Peng fan structure and its features.
    DC blower fan manufacturers mainly composed of the following six parts: the motor, the air filter, blower body, the air chamber, the base (and fuel tank), drip mouth. Volume change between flow fan blade is mainly dependent on the cylinder offset eccentric rotor operation, and use of rotor slots so as to achieve the air intake, compression, spit. By DC blower in operating pressure differential natural lubrication to drip mouth, dropped within the cylinder to reduce friction and noise, but also the inner cylinder gas does not return, this is also called DC Blower DC Blower vane.
     DC blower fan manufacturers mainly medium conveying clean air, clean gas, sulfur dioxide and other inert gas main. It can also be produced on demand transport other flammable, explosive, erosion, toxic and special gases. Thus where the application is very extensive.
     DC Peng Fan Features: 1, DC blower ink is very small, because only the bearings and gears in a mechanical contact with the selection, rotor, housing and ring gear mechanical strength to meet. Operating safety, the use of long-life 2. The use of the time, with the pressure changes, the flow change is very small. But along with the speed and flow rate changes. Therefore, the pressure of traffic planning a wide choice to select traffic by selecting the rotational speed required arrival. 3. DC high blower speed, the small space of the rotor and the rotor, between the rotor and the body, and less leakage, high volume power. Processing means and strong technical force, to ensure reasonable space, homogeneous, both arrived in power but not so high volumetric thermal expansion of the body's internal friction occurs.